What Counts as Recycled Plastic in Packaging? The PET Bottle Decision and Three EU Acts Planned for Q4 2026
What Changed for Recycled Plastic in Packaging Between June and November 2026?
Two things changed. Commission Implementing Decision (EU) 2026/1425 of 30 June 2026 set new rules for counting recycled plastic in single-use PET beverage bottles under Directive (EU) 2019/904. Three Commission acts under Regulation (EU) 2025/40, for all plastic packaging, appeared on the Have your say portal with adoption planned for the fourth quarter of 2026, and each went through a call for evidence that ran until 16 September 2026.
Article 7(8), (9) and (10) of Regulation (EU) 2025/40 set 31 December 2026 as the date by which the Commission adopts these acts. On 12 November 2026, seven weeks before that date, none of the three has reached the stage where the Commission publishes the draft act for feedback.
The basics stay in our guides to mass balance and chain of custody, to recycled content targets for brand owners and to PET stretch blow-moulded bottles. This update is for brands, PET, PE and PP converters, recyclers and importers of recyclate.
Regulation (EU) 2025/40 applies to all packaging, regardless of material, whether household, commercial or industrial, under Article 2(1). Its recycled content rule, Article 7, covers plastic parts of packaging only. Article 7(4) and (5) exclude some packaging from its minimum percentages, among them compostable plastic packaging, packaging for the transport of dangerous goods, certain medicinal and medical device packaging, contact-sensitive packaging of food for infants and young children, and any plastic part under 5 % of the weight of the packaging unit. Under Article 7(6), manufacturers or importers demonstrate compliance in the technical information concerning the packaging referred to in Annex VII.
Key Facts
- Commission Implementing Decision (EU) 2026/1425 of 30 June 2026 lays down rules for the calculation, verification and reporting of recycled plastic in single-use PET beverage bottles, and EUR-Lex records its entry into force on 23 July 2026.
- Under Article 7(8) of Regulation (EU) 2025/40, the Commission must adopt by 31 December 2026 implementing acts establishing the methodology for the calculation and verification of recycled content recovered from post-consumer plastic waste.
- Under Article 7(1), the minimum recycled content applies by 1 January 2030 or 3 years from the entry into force of the Article 7(8) implementing act, whichever is the latest.
- On 12 November 2026, the Commission's Have your say portal lists three Article 7 acts planned for the fourth quarter of 2026. Each had a call for evidence from 14 August to 16 September 2026; none has reached the draft-act feedback stage.
- Article 39(2) provides that the EU declaration of conformity has the model structure set out in Annex VIII, contains the elements specified in the module in Annex VII, and is continuously updated.
- Our dated PPWR referential (baseline reviewed 3 October 2026) confirms the Article 39(2) statement; Article 7 is read on the Official Journal text.
What Does the PET Bottle Decision Settle, and for Whom?
Commission Implementing Decision (EU) 2026/1425 settles how recycled plastic is calculated, verified and reported for single-use PET beverage bottles under Article 6(5) of Directive (EU) 2019/904. The PET bottle decision binds Member States, which collect and verify the data, and economic operators in the PET bottle chain, which declare recycled plastic per batch.
Under Article 6(5) of Directive (EU) 2019/904, PET bottles contain at least 25 % recycled plastic from 2025, and beverage bottles at least 30 % from 2030, each calculated as an average for all such bottles placed on the market of a Member State. The decision repeals Implementing Decision (EU) 2023/2683, the earlier method. Its main rules are below.
| Rule | What Implementing Decision (EU) 2026/1425 says | Where |
|---|---|---|
| What counts | Recycled plastic is plastic which was post-consumer plastic waste before recycling, recycled in the Union | Article 1(1) |
| Third countries | From 21 November 2027, also waste recycled in OECD-decision countries or countries with an EU agreement on equivalent standards | Article 1(1)(a) and (b) |
| Calculation | Weight of recycled plastic divided by weight of plastic in PET bottles placed on a Member State's market in a year | Article 2 |
| Mass balance | Used at a calculation point where the proportions of eligible material are not known | Articles 6(3) and 7 |
| Fuels and losses | Dual-use factor equal to 0: nothing attributed | Article 7(5)(c) |
| Declarations | One declaration per batch on the Annex V template; supplier declarations kept for at least five years | Article 8(3) |
| Third-party verification | Annual facility-level verification for mass-balance operators whose inputs and outputs are not both polymers; three-yearly for SMEs | Article 8(5) |
| Review | By 1 January 2030 at the latest | Article 10 |
What Is Mass Balance Accounting Under the PET Bottle Decision?
Mass balance accounting is a set of calculation rules used to determine the attributed amount of recycled plastic when eligible material is processed together with other material. Implementing Decision (EU) 2026/1425 requires mass balance accounting wherever the proportion of eligible material is not known at a calculation point, a situation that recital 8 links to chemical recycling.
Eligible material is post-consumer plastic waste and material stemming from post-consumer plastic waste, under Article 1 of the decision. Article 7 of the decision then limits what can be attributed:
- Fuel use excluded. Outputs in the categories "fuels" and "losses" carry a dual-use factor of 0 (Article 7(5)(c)).
- Short periods, no overdraft. Accounting periods are capped at three months, and "a negative account of attributed amounts shall not be permitted at any time" (Article 7(7)).
- No transfers. Attributed amounts cannot move between facilities or companies (Article 7(8)).
For a PET bottle chain, a mass-balance certificate is usable only where its accounting follows these rules.
Does the PET Bottle Decision Decide How Article 7 of the PPWR Is Calculated?
No. Recital 33 of Implementing Decision (EU) 2026/1425 states that its methodology should apply only to PET bottles. Article 7(8) of Regulation (EU) 2025/40 provides a separate implementing act for calculating and verifying recycled content in plastic packaging, and recital 32 of the PET bottle decision asks the Commission to consider aligning the two.
Directive (EU) 2019/904 counts an average across a Member State's market. Article 7(1) of Regulation (EU) 2025/40 counts any plastic part of packaging, per packaging type and format of Table 1 of Annex II, as an average per manufacturing plant and year. Article 7(1) sets 30 % for contact-sensitive PET packaging and 10 % for contact-sensitive packaging of other plastics, in both cases except single-use plastic beverage bottles, 30 % for single-use plastic beverage bottles and 35 % for other plastic packaging. Under Article 7(2), single-use plastic beverage bottles reach 65 % by 1 January 2040.
A single-use PET bottle therefore sits under both texts. The Article 7(8) act governs the PPWR count, and its content is unknown on 12 November 2026. The PET bottle decision is the most detailed published sign of how the Commission counts chemically recycled plastic, not a preview of the PPWR act.
Which Three PPWR Acts Are Planned for the Fourth Quarter of 2026?
Three Commission acts under Regulation (EU) 2025/40 are planned for adoption in the fourth quarter of 2026: initiative 18753 on calculating and verifying recycled content in plastic packaging, initiative 18752 on conditions for importing recycled materials, and initiative 19033 on sustainability criteria for plastic recycling technologies. Each had a call for evidence from 14 August to 16 September 2026. On 12 November 2026, none of the three has reached the stage where the Commission publishes the draft act for feedback.
| Initiative on Have your say | PPWR basis (our reading) | Act type | Status on 12 November 2026 |
|---|---|---|---|
| 18753 — rules for the calculation and verification of recycled content in plastic packaging | Article 7(8) | Implementing decision | Listed on 14 July 2026; call for evidence from 14 August to 16 September 2026, 188 contributions; draft act not yet open for feedback |
| 18752 — conditions for importing recycled materials into the EU for use in packaging | Article 7(10) | Implementing decision | Listed on 14 July 2026; call for evidence from 14 August to 16 September 2026, 142 contributions; draft act not yet open for feedback |
| 19033 — sustainability criteria for plastic recycling technologies | Article 7(9) | Delegated decision | Listed on 12 August 2026; call for evidence from 14 August to 16 September 2026, 82 contributions; draft act not yet open for feedback |
The portal summary of initiative 18752 says the act sets rules so that plastic materials collected or recycled in non-EU countries "are assessed, verified and certified in a way that is equivalent to the system in place in the EU for such materials". Under Article 7(8), the calculation act also sets the format for the Annex VII technical documentation, and its verification methodology may include independent third-party audits on manufacturers of recycled content in the Union and of plastic packaging placed on the market as a sales unit separate from other products.
Council document ST 14077/26 of 9 October 2026 carries information from Italy for the Environment Council of 12 October 2026. Italy supports "separate customs codes for recycled and virgin polymers" and seeks "an EU certification and traceability system for recycled content with accredited third-party verification". The note is a Member State position.
When Do the Calculation Rules and the Targets Start to Bind?
Under Article 7(11) of Regulation (EU) 2025/40, recycled content must be calculated and verified under the Article 7(8) implementing act by 1 January 2029 or 24 months from its entry into force, whichever is the latest. The Article 7(1) minimum percentages apply by 1 January 2030 or 3 years from that entry into force, whichever is the latest.
| Date | What happens | Source |
|---|---|---|
| 23 July 2026 | PET bottle decision in force | EUR-Lex record of Implementing Decision (EU) 2026/1425 |
| 31 December 2026 | Due date of the calculation, sustainability-criteria and equivalence acts | Article 7(8), (9) and (10) |
| 21 November 2027 | Third-country recycled plastic starts counting towards the PET bottle target | Article 1(1) of the decision |
| 1 January 2029, or 24 months after the Article 7(8) act, whichever is later | Calculation and verification follow the Article 7(8) act | Article 7(11) |
| 1 January 2030, or 3 years after the Article 7(8) act, whichever is later | Article 7(1) minimum percentages | Article 7(1) |
| 1 January 2040 | Article 7(2) minimum percentages | Article 7(2) |
A later act moves the conditional dates with it. Our article on firm and conditional PPWR deadlines explains the mechanism.
What Can Brands, Converters, Recyclers and Importers Prepare Now?
Brands, converters, recyclers and importers can prepare the evidence chain now: a recycled content declaration per batch from each supplier, the certificate and chain-of-custody model behind each figure, and the countries where the waste was collected and recycled. Article 7(3) of Regulation (EU) 2025/40 already sets those collection and recycling conditions.
Under Article 7(3), recycled content counts when the post-consumer plastic waste was collected in the Union, or in a third country under equivalent separate collection standards, and, where applicable, recycled under EU or equivalent emission rules.
- Brand owners and other manufacturers. Record recycled content per plastic part and per packaging reference, with its plant and year. Article 7(5)(b) leaves out any plastic part under 5 % of the total weight of the packaging unit. Under Article 16(1), suppliers provide the manufacturer with the information and documentation needed to demonstrate conformity.
- PET, PE and PP converters. Keep each batch declaration with its certificate and its chain-of-custody model: segregation, controlled blending or mass balance. The PET bottle decision has an Annex V template; other plastics have none yet.
- Recyclers. Separate polymer outputs from fuel outputs, and keep accounts by facility and by quarter at most, as the PET bottle rules require.
- Importers of recyclate or packaging. Record the country of collection and the country and installation of recycling for each lot. For PET bottles, third-country recyclate counts only from 21 November 2027. For the PPWR, the equivalence method of Article 7(10) is pending.
Under Article 15(3), manufacturers keep the technical documentation and the EU declaration of conformity for 5 years from placing on the market, or 10 years for reusable packaging. See also what counts as supplier evidence.
What Does the Referential Not Confirm?
Our dated PPWR referential (baseline reviewed 3 October 2026) confirms the Article 2(1) and Article 39(2) statements as quoted. Its claim check returned no match for the statements below, which are read on the linked sources and presented as such.
- Article 7(1), (2), (3), (5)(b), (6), (8), (9), (10) and (11), Article 15(3) and Article 16(1), as phrased here: read on the Official Journal text, not recorded in our referential.
- Implementing Decision (EU) 2026/1425 and Directive (EU) 2019/904, read on EUR-Lex on 20 October 2026; the Have your say status, read on 12 November 2026; ST 14077/26, read in the Council register.
- Our readings: the paragraph of Article 7 behind each initiative, and the absence of the words "mass balance" from the PPWR.
- Not read: the outcome of the Environment Council of 12 October 2026 and the staff working document published with the PET bottle decision.
Frequently Asked Questions
Does mass-balanced chemically recycled PET count towards the PET bottle target?
Yes, under Implementing Decision (EU) 2026/1425, when attributed under its Article 7 rules. For Article 7 of Regulation (EU) 2025/40, the answer depends on the Article 7(8) act.
Can recyclate made outside the EU count?
Under Article 7(3) of Regulation (EU) 2025/40, yes, where collection and recycling meet equivalent standards; the Article 7(10) method is pending. For PET bottles, the decision counts third-country recyclate from 21 November 2027.
Is a single-use PET bottle covered by both texts?
Yes: the Member State figure of Directive (EU) 2019/904, and the per-plant minimum of Article 7(1) of Regulation (EU) 2025/40.
How PPWR Connect Helps
PPWR Connect is software: it does not calculate or verify recycled content on anyone's behalf, it does not certify recyclate, and it is not a verifier, a certification body or a notified body. Since 30 July 2026, a supplier PDF such as a test report, a certificate or a datasheet can be uploaded to PPWR Connect, which reads it and files it as evidence against the SKU for the Declaration of Conformity. Since 24 August 2026, each value recorded in PPWR Connect keeps where it came from: manual entry, import or supplier document. The Academy course Substances & Supplier Data covers what a brand must ask and what a supplier must provide under Article 16. To find the packaging still without supplier evidence, start with our PPWR compliance software or the PPWR readiness assessment.
Published by
Rutherford (rutherford.fr) develops production control software for offset printers and converters, including ColorLoop. Veoria (veoria.com) develops inline colour measurement for label and packaging presses, including DeltaOne.