Six Things We Keep Hearing About the PPWR That the Text Does Not Say
Which Six Statements About the PPWR Do We Keep Hearing, and What Does the Text Say?
Six statements return in meetings with brands, importers, converters and distributors: no enforcement before February 2027, a QR code due in 2028 or 2030, a packaging passport in 2028, REACH information only on request, a single EU-wide EPR, and a 2030 cliff. Regulation (EU) 2025/40 supports none of them; each is read below against the Official Journal text.
The statements were heard in September and October 2026; no company is named. Nothing here is legal advice.
Key Facts
- Under Article 71, Regulation (EU) 2025/40 has applied since 12 August 2026.
- Under Article 68(1), Member States lay down their rules on penalties by 12 February 2027.
- The harmonised label of Article 12(1) is due from 12 August 2028, or 24 months after the entry into force of the implementing acts adopted under Article 12(6) or 12(7), whichever is the latest.
- Article 12(1): a QR code or other data carrier is optional for ordinary packaging.
- Under Article 44(2), producers register in the register of each Member State where they first make packaging or packaged products available.
- Under Article 6(3), packaging not recyclable within grades A, B or C cannot be placed on the EU market from 1 January 2030 (or 24 months after the Article 6(4) delegated acts enter into force, whichever is later).
Is There Really No Enforcement Before 12 February 2027?
No. Under Article 68(1) of Regulation (EU) 2025/40, 12 February 2027 is the date by which Member States lay down their rules on penalties, not the date the Regulation starts to bind. Under Article 71, the Regulation has applied since 12 August 2026, and Article 62 already requires a Member State to make an operator end a formal non-compliance.
Under Article 62(1), a Member State that becomes aware that the EU declaration of conformity has not been drawn up, or that the Annex VII technical documentation is missing or incomplete, requires the operator to put an end to the non-compliance. Under Article 62(2), where such a non-compliance persists, the Member State prohibits the packaging from being made available, or has it recalled or withdrawn. Under Article 58(1), market surveillance authorities evaluate packaging that presents a risk to the environment or human health and require corrective measures within a prescribed period.
Two Commission documents are quoted as a grace period, and neither is one. The factsheet of 19 October 2026 on the PPWR and small businesses states that there is "no need to re-package or destroy packaging already produced" where traceability markings are missing. The Commission's page on extended producer responsibility for small businesses asks Member States to enforce one obligation, the authorised representative of Article 45(3), "in a constructive and pragmatic way" and to "abstain from sanctioning operators" while the suspension proposal is examined.
What to do instead: hold, for each packaging placed on the market since 12 August 2026, the Annex VII technical documentation and the EU declaration of conformity that Article 15(2) requires before placing on the market, in the Annex VIII model of Article 39(2). Our article on the PPWR grace period and enforcement details who inspects what.
Does the PPWR Set a 2028 or 2030 Date for a QR Code on Packaging?
No. Regulation (EU) 2025/40 fixes no date for a QR code on ordinary packaging. The harmonised label of Article 12(1) is due from 12 August 2028, or 24 months after the entry into force of the implementing acts adopted under Article 12(6) or 12(7), whichever is the latest. A QR code or other data carrier is optional for ordinary packaging. The label does not apply to transport packaging, except e-commerce packaging.
12 August 2028 is the earliest date of the harmonised material label of Article 12(1), a label based on pictograms, not on a code; the Article 12(6) implementing acts were due by 12 August 2026 and have not been adopted, so the 24-month clock has not started. Article 12(1) adds that economic operators "may place a QR code or other type of standardised, open, digital data carrier": a possibility, not an obligation. The exception is reusable packaging: under Article 12(2), from 12 February 2029 or 30 months after the Article 12(6) implementing act, whichever is the latest, reusability information goes through a QR code or other data carrier.
What to do instead: plan artwork against the label floor, not against a QR date, and keep the destination of each separable component on file: a QR code that gives no access to the Article 12 information is a formal non-compliance under Article 62(1), point (c). Our brand-owner guide to PPWR labelling covers Article 12 in detail.
Does a Product Passport for Packaging Arrive in 2028?
No. Regulation (EU) 2025/40 creates no product passport for packaging, in 2028 or in any other year. The digital product passport belongs to Regulation (EU) 2024/1781, the Ecodesign for Sustainable Products Regulation, and recital 70 of the packaging Regulation only asks that, where a packaged product carries such a passport, the same data carrier also serves the packaging information.
The European Commission describes the passport of Regulation (EU) 2024/1781, which entered into force on 18 July 2024, as "a digital identity card for products, components, and materials". Under Article 3(1), the packaging Regulation borrows only two definitions from that act. Recital 70 states that, where the packaged product is covered by Regulation (EU) 2024/1781 or other Union law requiring a digital product passport, "that digital product passport should also be used for providing the relevant information under this Regulation".
What to do instead: do not buy a "packaging passport" to meet Regulation (EU) 2025/40. The Regulation asks for the Annex VII technical documentation, the EU declaration of conformity and, in time, the Article 12 label. Our article on the passport question for packaging explains where the confusion started.
Is REACH Information Only Due When a Customer Asks?
No. Under Article 33 of Regulation (EC) No 1907/2006, suppliers of articles containing a Candidate List substance above 0.1% weight by weight provide the recipients with enough information to allow safe use, at least the name of the substance. ECHA describes this duty as applying directly after a substance is included in the Candidate List; only consumers must ask.
According to the European Chemicals Agency, the recipients are industrial or professional users and distributors; a consumer can request similar information, and the supplier provides it within 45 days, free of charge.
Regulation (EU) 2025/40 adds its own duties on substances, and none waits for a question either. Under Article 16(1), suppliers provide the manufacturer with all the information and documentation necessary for the manufacturer to demonstrate the conformity of the packaging and the packaging materials. Under Article 5(4), the sum of lead, cadmium, mercury and hexavalent chromium in packaging or packaging components must not exceed 100 mg/kg. Under Article 5(5), food-contact packaging containing PFAS above the thresholds has been prohibited from being placed on the market since 12 August 2026.
What to do instead: ask each supplier for the Article 33 statement and the Article 16 documentation together.
Is the EU Preparing a Single EU-Wide EPR Scheme?
No. Neither Regulation (EU) 2025/40 nor the Commission's suspension proposal COM(2025) 982 creates a single EU-wide EPR scheme for packaging. Under Article 45(1), extended producer responsibility runs under the national schemes of Directive 2008/98/EC, and under Article 44(2) producers register in each Member State where they first make packaging or packaged products available.
What exists is national by design. Under Article 44(1), each Member State establishes a national register within 18 months of the entry into force of the first implementing act adopted under Article 44(14). Under Article 45(3), the producers referred to in Article 3(1), point (15)(c) and (d), appoint an authorised representative for the extended producer responsibility in each other Member State where they first make packaging available.
What is on the table is narrower than a single scheme. The Commission proposal COM(2025) 982 of 10 December 2025 would suspend the application of Article 45(3) until 1 January 2035 for producers established in the Union; it is a proposal, and Article 45(3) applies as published. Since then, the European Parliament adopted its position on 20 October 2026 and the Council agreed its negotiating mandate on 21 October 2026, limited to producers that make less than 1 tonne of packaging available a year in a given Member State; the two texts differ, none had been published in the Official Journal by 20 November 2026, and our article on the Parliament vote and the Council mandate compares them. The Austrian note ST 14126/26 of 9 October 2026 proposes "a single, central, EU-wide entry point for EPR registration" that would transmit data to the competent national registers, and asks that the planned implementing act on registration not be issued at this stage; the Environment Council of 12 October 2026 heard the point and adopted no conclusions. A note is not an act.
What to do instead: register in each Member State where you first make packaging available, and keep every registration number with the SKU data. Our guide to producer registration in every EU market walks through the national registers.
Does Everything Have to Be Perfect in 2030?
No. Regulation (EU) 2025/40 has no 2030 cliff: some obligations have applied since 12 August 2026 and 2030 floors wait on acts. Under Article 6(3), packaging not recyclable within grades A, B or C cannot be placed on the EU market from 1 January 2030 (or 24 months after the Article 6(4) delegated acts enter into force, whichever is later).
| Obligation | Provision | Date written in the text | Condition or note |
|---|---|---|---|
| Recyclability obligation, all packaging | Article 6(1) | 12 August 2026 | Article 6(1) has applied since 12 August 2026; the Article 6(2) conditions apply later: design for recycling from 1 January 2030 (or 24 months after the Article 6(4) delegated acts enter into force, whichever is later), separate collection, sorting and recycling at scale from 1 January 2035 at the earliest |
| Floor at grades A, B or C | Article 6(3) | 1 January 2030 (or 24 months after the Article 6(4) delegated acts enter into force, whichever is later) | The criteria that turn a packaging unit into a letter wait on the Article 6(4) delegated act, due by 1 January 2028 |
| Minimum recycled content in plastic packaging | Article 7(1) | 1 January 2030 (or 3 years after the Article 7(8) implementing act enters into force, whichever is later) | Article 7(2) raises the rates by 1 January 2040 |
| Empty-space ratio of 50% | Article 24(1) | 1 January 2030 (or 3 years after the Article 24(2) implementing acts enter into force, whichever is later) | Article 24(2) acts due by 12 February 2028 |
| Annex V format restrictions | Article 25(1) | 1 January 2030 | Fixed date in the text |
| Re-use target of 40% for transport packaging in the listed formats | Article 29(1) | 1 January 2030 | Article 29(1) covers pallets, boxes, trays, plastic crates, intermediate bulk containers, pails, drums, canisters, pallet wrappings and straps used within the territory of the Union |
| Harmonised material label | Article 12(1) | 12 August 2028 (or 24 months after the implementing acts adopted under Article 12(6) or 12(7) enter into force, whichever is the latest) | The Article 12(6) implementing acts were due by 12 August 2026 and have not been adopted |
What to do instead: treat 2030 as a floor that moves with each act, and record per packaging unit which obligation applies now and which one waits on an act. Our article on firm and conditional PPWR deadlines keeps the distinction act by act.
What Does the Referential Not Confirm?
Our dated PPWR referential (baseline reviewed 3 October 2026) confirms thirteen statements here and contradicts two of the six as worded: a QR code presented as compulsory for ordinary packaging, where the text says optional, and a passport the text does not create. Its claim check found no match for the points below, read on the linked text.
- Articles 71, 68(1), 68(3), 62(1) and (2), 58(1), 15(2), 12(1) on transport packaging, 12(2), 44(1), 44(2), 45(1), 45(3), 6(2), 6(3), 6(4), 7(1), 7(2), 24(2), 25(1), 29(1), 3(1) on borrowed definitions, and recital 70, read on the Official Journal text, not recorded in our referential.
- Every statement on REACH and Regulation (EU) 2024/1781, read on the ECHA and Commission pages; the Commission factsheet and small-business page, the Council page, the Austrian note and COM(2025) 982, all read on 21 October 2026. EUR-Lex returned no article text of Regulation (EC) No 1907/2006 or of Regulation (EU) 2024/1781 to our reader that day.
Frequently Asked Questions
Is 12 February 2027 a deadline for companies?
No. Under Article 68(1) and 68(3), 12 February 2027 is the date by which Member States lay down their penalty rules and notify them to the Commission. Companies have been bound since 12 August 2026 under Article 71.
Do pallets, stretch film and strapping fall under the Regulation?
Yes. Pallets, stretch film and strapping are transport packaging. Article 2(1) applies to all packaging regardless of the material used, and to all packaging waste, whether it is used in or originates from industry, other manufacturing, retail or distribution, offices, services or households.
How PPWR Connect Helps
PPWR Connect keeps each packaging reference with its components, materials and markets, and since 12 September 2026 a per-market obligation profile answers "who is the producer" per jurisdiction. Since 2 September 2026, the four substance families tracked under Article 5 are declared per packaging component as present, absent or not declared, each with its source and supplier evidence, and each recorded value keeps where it came from: manual entry, import or supplier document. Since 15 October 2026, the action center groups actions by packaging, and Mark done records who did it and when. PPWR Connect is software: it is not a market surveillance authority, a producer responsibility organisation, an authorised representative or a legal adviser. Start with our PPWR compliance software or the PPWR readiness assessment.
Published by
Rutherford (rutherford.fr) develops production control software for offset printers and converters, including ColorLoop. Veoria (veoria.com) develops inline colour measurement for label and packaging presses, including DeltaOne.