Țintele de reutilizare din PPWR: ce trebuie să știe orice companie de ambalaje înainte de 2030

PPWR Reuse Targets: What Every Packaging Company Must Know Before 2030

Among the most transformative provisions of Regulation (EU) 2025/40 — the PPWR — are the mandatory reuse and refill targets set out in Articles 29 and 30. Unlike recyclability requirements that kick in from August 12, 2026, the reuse obligations follow a phased timeline starting January 1, 2030, with increasingly ambitious targets through 2040.

With pallet wrapping films and straps carved out of the 100% reuse targets by delegated decision C(2026) 511 of 25 February 2026, and the delegated act on the minimum number of rotations still pending, now is the time to understand what reuse obligations apply to your packaging and how to prepare. This article breaks down every target, exemption, and practical step.

What the PPWR Means by "Reusable Packaging"

Article 11 of the PPWR defines reusable packaging as packaging that has been conceived, designed, and placed on the market to accomplish multiple trips or rotations within a reuse system. This is not just about design — the packaging must actually circulate within an organised system that collects, inspects, reconverts (if needed), and redistributes the packaging for reuse.

Key conditions include: the packaging must be designed to withstand multiple use cycles without loss of function or safety; it must be accompanied by a system that enables return, collection, and redistribution; and when it finally reaches end-of-life, it must be recyclable. A delegated act defining the precise minimum number of rotations per packaging format is due by February 12, 2027.

Reuse Targets by Packaging Category (Article 29)

Article 29 sets differentiated reuse targets depending on the type of packaging and the sector. All targets are expressed as a percentage of packaging units placed on the market by each economic operator.

Transport Packaging

Beverage Packaging

Grouped & E-Commerce Packaging

Important note: E-commerce sellers must offer consumers a reusable shipping option at checkout from January 1, 2030. This applies to all online sales into the EU, including those from third-country sellers.

The Pallet Wrapping and Strapping Carve-Out: C(2026) 511

On 25 February 2026, the Commission adopted delegated decision C(2026) 511, exempting pallet wrapping films and straps from the 100% reuse targets of Articles 29(2) and 29(3). It is real relief for single-use film in the flows those paragraphs cover, and it is exactly as narrow as it sounds: the decision does not remove film or strapping from the definition of packaging. Both remain assessed, declared and counted in your EPR volumes.

Beyond that decision, the exemptions that bear on the Article 29 targets are the ones the article carries itself. Paragraph 4 takes out dangerous goods, custom packaging for large machinery, flexible formats in direct contact with food and feed, and cardboard boxes. Paragraph 13 exempts micro-enterprises placing no more than 1,000 kg of packaging per year in a Member State. Wooden pallets do not appear in that list. A separate wooden-pallet exemption has circulated in trade coverage, but we can point to no adopted act that grants one — so plan on wooden pallets counting towards the transport target like every other pallet.

How Reuse Rates Are Measured

No methodology for calculating reuse rates has been adopted, and none of the delegated acts we track on the Commission's schedule is set to establish one. A mid-2027 deadline for such a methodology has circulated, but we can source no provision that sets it — and Article 29(13) is not that provision: it is the micro-enterprise exemption. The one scheduled act on this ground is the Article 11(2) delegated act on the minimum number of rotations, due by February 12, 2027. What the regulation itself provides is a framework: the rate is expressed as the percentage of packaging units that are reusable and part of a functioning reuse system, measured at the level of each economic operator.

This means companies cannot simply design reusable packaging and count it — they must demonstrate that a real return-and-reuse infrastructure exists. This is a critical distinction that separates "reusable in theory" from "reused in practice."

What About Refill Targets? (Article 30)

Article 30 complements reuse targets with refill obligations for specific sectors. From 2030, large retailers (with sales areas exceeding 100 m²) must dedicate a percentage of their sales area to products available in refillable packaging or through refill stations. Final distributors of beverages for on-premises consumption must also offer consumers the option to bring their own container.

Member States may grant exemptions where they can demonstrate that equivalent environmental outcomes are achieved through high recycling rates and established deposit-return schemes.

Practical Steps: How to Prepare Now

While 2030 may seem distant, reuse systems take years to build. Companies that start planning now will be best positioned. Here is what you should do:

1. Audit your packaging portfolio. Identify which of your packaging formats fall under Article 29 targets. Map volumes by category (transport, grouped, beverage, e-commerce) to understand your exposure.

2. Evaluate reuse system options. Decide whether to build your own return system, join an existing pooling operator (such as IFCO, CHEP, or Loop), or partner with industry consortia. Consider the capital investment, reverse logistics costs, and cleaning or reconditioning requirements.

3. Redesign packaging for durability. Reusable packaging must survive multiple rotations without compromising safety or function. This often means switching from single-use corrugated to rigid plastic or metal containers for transport, or from disposable bottles to refillable glass or PET.

4. Track and report reuse data. You will need auditable records of how many units enter the reuse system, how many complete rotations, and end-of-life management. A PPWR compliance platform like PPWR Connect can help you track reuse KPIs alongside recyclability, recycled content, and DoC obligations.

5. Monitor delegated acts. The minimum rotation numbers under Article 11(2), due by February 12, 2027, will significantly affect compliance strategy. Stay informed through the Commission's PPWR implementation page and industry associations.

Penalties for Non-Compliance

While reuse targets begin in 2030, Member States must establish their penalty frameworks before then. Non-compliance with reuse obligations falls under the same enforcement regime as other PPWR requirements: penalties must be "effective, proportionate, and dissuasive" (Article 68). In practice, this will mean fines, market restrictions, and potentially product recalls for persistent non-compliance.

Start Your Reuse Strategy Today

The PPWR reuse targets represent a fundamental shift from linear to circular packaging. Companies that treat this as a 2030 problem risk being caught unprepared — reuse infrastructure, supplier agreements, and packaging redesigns all take significant lead time. PPWR Connect helps you map your entire packaging portfolio against all PPWR obligations — including reuse, recyclability, recycled content, and documentation — so you can build a compliance roadmap that covers every deadline from August 2026 through 2040.